Sealcoating Plus 763-670-6586
- Sealcoating
- Hot Crack Filling
- Asphalt Repair
- Asphalt Patching
- Parking Lot Striping
Awards
Best of 2020 Minneapolis
Best of 2020 Minneapolis
Best of 2020 Minneapolis
Award received for the 2020 Sealcoating Season.
Angie's List
Best of 2020 Minneapolis
Best of 2020 Minneapolis
Sealcoating Plus has been awarded the Super Service Award each year since 2014.
Sealcoating Process
Power Clean
Cleaning the surface is the most important step prior to sealcoating. We use a combination of high power blowers, power brooms, and wire brushes to remove all dirt and debris. Cracks are cleaned of all dirt and vegetation. Some driveways with excessive dirt build-up may need to be power washed before sealcoating.
Treat Oil Spots
We use a special primer on oil spots to promote sealer adhesion.
Power Trimming
Trimmed edges allow the sealer to cover the entire asphalt surface and provides a manicured finish.
Hot Crack Filler
Commercial rubberized hot crack filler is heated and applied to all cracks 1/4 - 1/2 inch wide. This product remains flexible allowing the material to expand and contract. Due to varied weather conditions, cracks may re-open. This is not permanent solution and requires yearly annual inspection and touch up as needed.
Detail Brush Application
Our attention to detail allows careful application of sealer with a detail brush to protect your adjoining hardscape surfaces. Sealer is applied only to your asphalt surface.
Sealcoating
We apply commercial grade sealer that is precisely mixed in our fully agitated 550-gallon tank. This ensures a consistent and durable sealcoat product providing a tough, durable, anti-skid surface. The sealcoat is typically applied with a sealcoating brush. Large driveways and parking lots are often sprayed.
Barricade Access
We barricade your driveway or parking lot with banner tape. Your asphalt should be free from vehicle traffic for 24-48 hours.